SUS304 SUS316 LPG Series High speed Centrifugal Fruit juice Spray
Drying Equipment for foodstuff
spray dryer priceis a special equipment and is suitable for drying
emulsion,suspending liquid,liquor and so on .Particularly it has
unique for drying polymers and resins; dyestuff and pigment;
ceramics, glass; derust agent; pesticide; carbohydrate, dariry
products; detergent and surfactant; fertilizer, organic compound,
inorganic compound and so on.
Liquid material is pumped into the top installed rotary disc
atomizer by mono pumpe and atomized into fine droplets inside the
drying chamber. Heated and filtered hot air will be blown into the
air distributor at the same time. The evenly and swirlly
distributed hot air completely contact with the droplets for heat
transfer. In several seconds, the droplets will be dried into
powder and sucked out into the cyclone for discharging via exhaust
1. Dry faster, the general time is only 5-15 seconds, with
instantaneous drying characteristics.
2. Materials take a very short period of time to complete the
drying process, adapted to the dry thermosensitive materials,
materials to maintain color, smell and taste.
3. Simplify the production process.The operational control is
simple,which is suitable for control of production, wet 40-90% of
the volume of liquid into a dry powder, reduce the crushing,
Spray drying is the technology most widely used in the liquid
technology shaping and in the drying industry. The drying
technology is most suitable for producing solid powder or particle
products from liquid materials, such as: solution, emulsion,
suspension and pump- able paste states. For this reason, when the
particle size and distribution of the final products, residual
water contents, volume density and the particle shape must meet the
precise standard, spray drying is one of the most desired
After been filtered and heated the air enters into the air
distributor on the top of the dryer. The hot air enters into the
drying room in the spiral form uniformly. Passing through the
high-speed centrifugal sprayer on the top of the tower, the
material liquid will rotate and be sprayed into the extremely fine
mist liquid beads. Through very short time of contacting the heat
air, the materials can be dried into the final products. The final
products will be discharged continuously from the bottom of the
drying tower and from the cyclones. The waste gas will be
discharged from blower.
The drying speed is high when the material liquid is atomized, the
surface area of the material will increase greatly. In the hot-air
flow, 95%-98% of water can be evaporated at a moment. The time of
completing the drying is only several seconds. This is especially
suitable for drying the heat sensitive materials. Its final
products own the good uniformity, flow ability & solubility.
And the final products are high in purity and good in quality. The
production procedures are simple and the operation and control are
easy. The liquid with moisture contents of 40-60% (for special
materials, the contents might be up to 90%.)can be dried into the
powder or particle products once a time. After the drying process,
there is no need for smashing and sorting, so as to reduce the
operation procedures in the production and to enhance the product
purity. The product particle diameters, looseness and water
contents can be adjusted through changing the operation condition
within a certain range.
ed centrifugal sprayer on the top of the tower, the material liquid
will rotate and be sprayed into the extremely fine mist liquid
beads. Through very short time of contacting the heat air, the
materials can be dried into the final products. The final products
will be discharged continuously from the bottom of the drying tower
and from the cyclones. The waste gas will be discharged from
- YIBU conventional Spray Dryer turns liquid into powder in a highly
efficient manner. It is used within fields as diverse as the dairy,
food and chemicals industries where it has won renown for its
performance. With more than 2,500 spray dryers installed worldwide,
YIBU Dryer combines experience and cutting-edge technology into
added-value solutions for its customers.
- Designed for the specific product to be dried in compliance with a
given industry’s standards and requirements, the conventional Spray
Dryer produces a fine powder with particle sizes between 20-300 my.
It is primarily applied in the chemical industry, but it has also
proved valuable in the production of food and dairy products.
- Atomization of the concentrate takes place via either a Rotary
Atomizer or high-pressure nozzles. The drying air enters through
the air disperser at a high velocity, ensuring optimal mixing with
the atomized concentrate. Evaporation is instantaneous, taking
place as the droplets pass through the drying chamber.
- Complete control of moisture content, particle structure, particle
size distribution, solubility, and wettability, and retention of
natural aromas and flavours.
- Unbeatable performance/cost ratio Energy efficient components,
continuous and rapid drying, ease of operation and process
automation provide complete control over yield and costs.
|Tep of inlet air||less than 350°C|
|Tep of outlet air||80-90|
|Transmitted||Compressed air||By machine|
ia. of atomizing disk
Electricity+ steam, oil fuel, gas
|+ Electricity+ steam||+ Electricity+ steam, oil fuel, gas||Solved by customer|
Powder of electric heater
Yield of dry powder (%)
|Installation Size for reference||A(mm)||1000||1290||1730||2500||2800||Decided in accordance with actual condition|