SUS304 SU316 LPG Series High speed Centrifugal Ephedra sinica
extract Spray Drying Equipment for foodstuff
1. Introduction of High-speed centrifugal price for Pilot spray
dryer 5kg/hour :
Laboratory table top spray dryer is the latest type of YIBU which
adopts advanced international technology and spare parts.
YIBU Laboratory Spray Dryer assembles many of new design, for
example, small size for free moving, combining air compressor and
electrical heater inside the cabinet, glass spray and cyclone
separator for inspecting. All the data and functions are controlled
2. Application High-speed centrifugal price for Pilot spray dryer
Spray dryer can be used in a wide range where the production of a
free-flowing powder sample is required. This technique has
processed materials in the following areas successfully:
Beverages, Flavours and Colouring, Milk and Egg Products, Plant and
Vegetable Extracts, Pharmaceuticals, Heat sensitive Materials,
Plastics, Polymers and Resins, Perfumes, Ceramics and Advanced
Materials, Soaps and Detergents, Blood, dyestuffs, Food Stuffs,
Adhesives, Oxides, Textiles, Bones, Teeth and Tooth Amalgan and
Most solutions and supernsions can be spray dried providing that
the resulting product has the characteristics of material.
It is popular in fields of Food, biology, material, pharmacy,
university, and R&D institute, etc. especially for processing
temperature-sensitive material , for e.g., powder, because material
only touch air for a brief moment so that heat couldn't destroy the
component of material.
II . Working Principle
The air are filtered and heated ,then into the distributor on the
top of the dryer, spiral hot air evenly go into drying chamber .
Liquid through the high-speed centrifugal atomizer on the top of
the tower , then (rotation)spray into very fine mist
droplets,contact with hot air and dried into the finished product
in a very short time . Dried product are continuously produced from
the bottom of the drying tower and the cyclone , the exhaust are
vented by fan .
3. Features High-speed centrifugal price for Pilot spray dryer
At a high speed of drying, after the spraying of the material
liquid, the surface area of the material will be increased greatly.
In the hot-air flow, 95%~98% of water can be evaporated at a
moment. The time of completing the drying needs only several
This is especially suitable for drying the heat sensitive
materials. Its final products own the good uniformity, mobility,
dissolving capacity. And the final products are high in their
purity and good in their quality. The production procedures are
simple and the operation and control are easy. The liquid with the
moisture contents 40~60% (for special materials, the contents may
reach 90%.) can be dried into the powder or particle products once
a time. After the drying, there is no need for smashing and
sorting, so as to reduce the operation procedures in the production
and to enhance the product purity. The product particle diameters,
looseness and water contents can be adjusted through changing the
operation condition in a certain scope. It is very convenient to
carry out the control and management.
4. Main Characters High-speed centrifugal price for Pilot spray
dryer 5kg/hour :
1. High efficient jet imported.
2. LCD touch screen displays temperature, airflow, air pressure,
pump speed and jet cleaner frequency.
3. Auto controlling: one touch on/off, once processing parameters
are set, peristaltic pump will be auto started; screen displays
animation of the whole process of experiment.
4. Manual controlling is available, be able to adjust technical
parameters during the process of experiment.
5. With jet cleaner (stylet), its frequency can be automatically
6. Power off thermal-protection, push off button and the equipment
will stop at once, except draught fan, make sure equipment won’t be
burned out by incorrect operation (Forcibly shut fan).
7. Build in oil-free air compressor. The sound is low than 60db,
and following the GMP standards.
8. Use PID controller, the accuracy of heating temperature is
9. A filter has been equipped to the inlet unit to prevent the
sample from contamination.
10. The self-priming peristaltic pump delivers the sample liquid
from a container through a small diameter jet into the main chamber
to avoid secondary pollution. To make sure the process conducted
steady and smoothly.
11. Narrow size distribution, more than 95% of the dry powders are
in the same range of particles.
12. Automatic jet cleaner (stylet) prevents the jet from becoming
blocked and variably controlled.
13. Innovative tower wall purging device, improves the material
5. Technical parameters High-speed centrifugal price for Pilot
spray dryer 5kg/hour :
Max capacity: 5000ml/h
Temperature range of Inlet air: 30°C -300°C
Temperature range of outlet air: 30°C -140°C
Precision of temperature: ± 1 °C
Dryer time: 1.0-1.5 S
Speed of squirt pump: 5000ml/h,
Spray direction: downwards co-current
Total power: 10KW 380V
Stainless steel tank diameter: 800mm
Dried powder restoring rate (%): ≥95
Atomizer speed: 40000rpm
|Tep of inlet air||less than 350°C|
|Tep of outlet air||80-90|
|Transmitted||Compressed air||By machine|
ia. of atomizing disk
Electricity+ steam, oil fuel, gas
|+ Electricity+ steam||+ Electricity+ steam, oil fuel, gas||Solved by customer|
Powder of electric heater
Yield of dry powder (%)
|Installation Size for reference||A(mm)||1000||1290||1730||2500||2800||Decided in accordance with actual condition|